Loading ...
Loading ...
Loading ...
www.NutrichefKitchen.com
6
IV. ELECTRIC DIAGRAM
V. I NSTRUCTION
• Note:
• Position your Cooler so that the plug is accessible.
• Keep your Cooler out of direct sunlight.
• Do not place next to heat generating appliance.
• Place the Cooler on a leveled surface that is strong enough to support the unit when it is fully loaded.
To level your Cooler, adjust the front feet located at the bottom of the unit.
• Important:
• Position the cooler in a dry and airy place with ambient temperature between 5-18ºC (41-64ºF).
• Before connecting the unit to a power source, allow it stand upright for approximately 2 hours. This
will reduce the possibility of any system malfunctions which may have occurred from handing during
transportation.
• When positioning the Cooler, 6 inches of space at the back and 10 inches of space both sides are
suggested. Do not put any objects on top of the unit which may block the air circulation.
• Power Connection:
• This Cooler should be properly grounded for your safety and in order to minimize the possibility of
electrical shock, the power cord of this unit is equipped with a 3-pin plug which ts with 3-pin wall
outlets.
• Never cut or remove the ground wire from the supplied power cord.
• The use of extension cords is not recommended.
• This unit requires a standard 110V-60Hz electrical outlet with a 3-pin plug.
• The cord should be secured behind the Cooler. Also, to prevent accidental injury, do not expose or
dangle the cord
Loading ...
Loading ...