Loading ...
Loading ...
Loading ...
24 Multi Air Conditioner
Installation
Celsius/Fahrenheit Switching
FAN
SPEED
MODE
Out door
Room Temp
Total on
Central Run
Defrost Preheat Out door
Room Temp
Total on
Central Run
Defrost Preheat
<Setting as Celsius> <Setting as Fahrenheit>
TEMP
TEMP
Room Temp
Total on
Central Run
Defrost Preheat Out door
PQRCUCS0C
1
If you want to change the temperature unit as the
Celsius or Fahrenheit, press the Temperature
control button(▼) and the Fan speed button same
time for three seconds to enter the setting Mode.
2
Press the temperature control button to change
the unit.
Ex) Setting unit as Fahrenheit.
3
After setting, press the Temperature control
button(▼) and the Fan speed button same time
for three seconds to exit the setting Mode.
The system will automatically release without
input after 30 seconds.
Trial Operation
The trial operation is to check the installation status of the product. The temperature will not be controlled during
trial operation. Instead the product will operate in several modes such as cooling, strong wind, comp-on.
Out door
Room Temp
Total on
Central Run
Defrost Preheat
PQRCUCS0C
FAN
SPEED
MODE
TEMP
TEMP
1
If you want to set the trial operation mode, press
the mode button and the Fan speed button same
time for three seconds.
2
Then the product will begin the trial operation and
the display will be like as shown on left side
picture.
3
If you want to cancel the trial operation mode, just
press the On/Off button.
4
The trail operation will be shut down
automatically after 18 minutes and system will go
to the standby mode.
n Necessary functions before using
Loading ...
Loading ...
Loading ...