Loading ...
Loading ...
Loading ...
13
Seasonal Cleaning
If the unit is not being used for a long time, please follow these steps.
•
Pull out drainage plug upper / lower to empty any water out.
•
Let the unit run under fan mode for 2 hours to dry out the machine internals
•
Turn off the unit, switch off the power point and remove the plug.
•
Clean and dry filters then reinstall them.
•
Pull out exhaust pipe for safe keeping.
•
Put the unit into a plastic bag and place it in a dry place.
Troubleshooting
Please contact professional serviceman without delay in following situation
Trouble
Cause
Solution
Machine
cannot work
Power off
Power on
“P2” flashes on screen or
water-full indicator turns on
Drain water out
Timer-off turns on
Turn off machine for three minutes,
Then restart it.
Machine auto-
restarts
frequently
Direct sunlight
Draw the curtains
Door and windows are open ,
many heat sources in the
room.
Close the door and windows, move
out heat sources.
Filters are too dirty.
Clean or replace filters
Air-inlet or air out-let is
blocked
Remove blockage
Too noisy
Machine is not on flat ground.
Place it on flat and solid ground,
avoiding shaking
Compressor
cannot work
Compressor time-delay
protection turns on
Wait for 3 minutes, then restart the
Machine after temperature reduces.
Note: If the machine is not working please contact your authorized agent.
Loading ...
Loading ...