Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
You have not
closed the cap of
the lling opening
properly.
Press the cap until you hear a
click.
Flakes and
impurities
come out of
the soleplate
during ironing.
Hard water forms
akes inside the
soleplate.
Use the Calc-Clean function one
or more times (see chapter
‘Cleaning and maintenance’,
section ‘Calc-Clean function’).
The
temperature
light ashes
red (specic
types only).
The
automatic shut-off
function has
switched off the
iron (see chapter
‘Features’).
Move the iron slightly to
deactivate the automatic shut-off
function. The red auto-off
indication of the temperature
light goes out.
Water drips
from the
soleplate after
the iron has
cooled down
or has been
stored
(specic types
only)
You have put the
iron in horizontal
position while
there was still
water in the
water tank.
Always set the steam control to
position 0 and empty the water
tank after use. Store the iron on
its heel.
ENGLISH 15
4239_000_8219_2_DFU Booklet_A6_v1.indd 15 18/07/14 14:06
Loading ...
Loading ...
Loading ...