Loading ...
Loading ...
Loading ...
8. Install screws and washers securing the counter weight to the work arm assembly using an 8mm Allen wrench.
Item Description Qty.
1 Counter Weight 1
2 Work Arm Assembly 1
3 Washer, Flat 3/8" 2
4 Screw, M10 x 1.5, 25mm 2
Tighten hardware to 14-16 (19-22 Nm).
9. Install screws and washers securing the arm pad to the arm pad mount assembly using an 8mm Allen wrench.
Item Description Qty.
1 Arm Pad 1
2 Arm Pad Mount Assembly 1
3 Washer, Flat 3/8" 4
4 Screw, M10 x 1.5, 35mm 4
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Install Front and Top Caps
1. Set front shrouds into the bottom cap. Install screws securing the front cap to the tower frame using a 10 mm wrench.
Item Description Qty.
1 Front Cap 1
2 Front Shroud, 1
3 Front Shroud, Right 1
4 Screw, M6, HCS, 50 mm 4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Page 23 of 34
Loading ...
Loading ...
Loading ...