Loading ...
Loading ...
Loading ...
5. Install screws and washers securing the pivot support assembly to the tower using an 8mm Allen wrench.
Item Description Qty.
1 Pivot Support Assembly 1
2 Screw, M10 x 1.5, 25mm 4
3 Washer, Flat 3/8" 4
4 Screw, M10 x 1.5, 35mm 1
5 Pulley Retainer 1
6 Spacer, 1 ¼" OD 1
Tighten hardware to 20-25 (27.1-33.9 Nm).
6. Slide handle assembly and collar onto the work arm assembly.
7. Tighten set screws in the collar using a 4mm Allen wrench.
Item Description Qty.
1 Handle Assembly 1
2 Work Arm Assembly 1
3 Collar 1
Tighten hardware to 8-10 (11-14 Nm).
NOTE: Align handle on the handle assembly in between the bumpers on the work arm assembly.
Item Description Qty.
1 Handle 1
2 Bumper 2
Page 22 of 34
Loading ...
Loading ...
Loading ...