Loading ...
Loading ...
www.oster.com
www.oster.com
4
5
PARTS IDENTIFICATION
KNOW YOUR ICE CREAM MAKER
HOW TO:
Before You Use Your Ice Cream Maker
BEFORE USE: Fill bucket 2/3 full of water. Let soak for
90 minutes. This will allow the wood to swell to ensure
the bucket does not leak.
NOTE: Before using for the rst time, wash all parts except
MOTOR DRIVE (see “How To Clean Your Ice Cream Maker”).
How To Use Your Ice Cream Maker
1. Mix your favorite ice cream recipe thoroughly in a
bowl PRIOR to putting it in the DASHER. TIP: Chill
(in the refrigerator) ice cream mixture and ICE
CREAM CANISTER prior to making ice cream.
2. While ice cream mixture and CAN are chilling, place
cleaned wood bucket on a at surface counter top.
Place DASHER and COVER nearby.
3. Once mixture and CAN are chilled, remove from
refrigerator to start the ice cream making process.
4. Pour chilled ice cream mixture into chilled ICE
CREAM CANISTER. Do not ll above the max level
marked on the inside of the CAN.
5. Insert DASHER into ICE CREAM CANISTER. Then place
COVER on ICE CREAM CANISTER by lining up the
stem on the DASHER with the hole on the COVER.
6. Carefully insert the ICE CREAM CANISTER with COVER
into the center of the BUCKET. Make sure ICE CREAM
CANISTER engages with the bottom of the BUCKET.
7. Carefully slide the rectangular tab (located on
opposite end of power switch) into the square bracket
I
G
H
F
E
D
C
B
A
A. Motor
B. Power Switch
C. Cover
D. Dasher
E. Ice Cream Canister
F. Bucket Slot
G. Latching Handle
H. Drain Hole
I. Wooden Bucket
FRSTIC-WDB_13EM1.indd 4-5 1/14/14 9:44 AM
Loading ...
Loading ...
Loading ...