Loading ...
Loading ...
Loading ...
Oven Vent and Racks
REMOVING, REPLACING, AND ARRANGING GLIDE
RACKS
The glide rack is an extendable rack that maizes food
preparation easier. It has glide tracks that allow the rack to
be pulled away from the oven without rubbing the sides of
the oven wall.
Removing and replacing the gllde racks
To remove the glide rack:
1. Lift up on the release lever located across the lower front
of the rack° as shown in figure 1.
2. While holding up the release lever (see figure 2), puii
the glide rack out of the oven until the stop position is
reached, use two hands if necessary.
3. Using both hands, grasp the upper and lower portions of
the glide rack (see figure 3).
4. Lift up the front of the rack slightly and continue to puil
the rack away from the oven.
5. Be sure to grasp both upper and lower rack portions
together when removing or handling the glide rack. The
rack portions move independently and are difficult to
handle unless held together.
To replace the gllde rack:
1. Grasp both upper and lower portions of the glide rack
(see figure 3).
2. Lift and hold the rack level between the oven cavity walls.
3. Tilt the front of the rack upward slightly and slide the rack
completely into position. Some force may be necessary to
maize sure the oven rack has snapped into place.
Figure I - Extendable glide rack with release lever in
locked position
Figure 2 - Extendable glide rack with release lever in
unlocked position
Figure 3 - Removing and replacing the oven glide rack.
13
Loading ...
Loading ...
Loading ...