Loading ...
2
Important Safety Instructions
Electrical safety and cord handling
·Voltage: Before plugging in the heater, make sure your outlet voltage and circuit
frequency correspond to the voltage stated on the appliance rating label.
·Electrical circuit: Always plug this heater into a separate wall outlet socket, which
must withstand 12.5A load. To avoid circuit overload, do not operate another
high-wattage product on the same circuit.
·Connection: To insert the plug, grasp it firmly and guide it into the outlet.
·WARNING! No adaptor, пo extension cord: Do not use the heater with a power
board, double adaptor or extension cord,as these may overheat and create a fire risk.
·Protect the power cord:
-Do not operate the heater with the cord coiled up; always fully unwind.
-Do not twist or kink the cord or let it touch heated surfaces.
-Do not pull the cord.
-Never carry the heater by the cord.
-Arrange the cord away from any traffic areas so no one will trip over it.
-Do not run the cord under carpeting or cover it with rugs, runners, etc.
·WARNING! To reduce the risk of fire, electric shock or injury:
-Never touch the heater with wet or damp hands or feet.
-Do not use the heater if any part of it has become wet. If it happens, please
immediately call a qualified service technician to inspect the heater and replace all
the wet parts.
-Never spill liquid into the heater; never immerse the cord, plug or any part of the
appliance in water or other liquids.Do not reach for an appliance that has fallen into
water. Under such circumstances, switch off and unplug immediately.
Damaged cord: Check the power cord regularly for visible damages in order to avoid
any hazards. If the cord is damaged, it must be replaced by the manufacturer or
qualified personnel.
·WARNING! Damaged heater: Do not pick up or operate the appliance if the power
supply cord, plug or housing is damaged, malfunctions, or has been dropped or
damaged in any manner.
·Plug: It is normal for the plug to feel warm; however, a loose fit between the AC
outlet and plug may cause overheating and distortion of the plug. Contact a qualified
electrician to replace a loose outlet.
·After use: Switch off and unplug the appliance from the power outlet when it is not
in use and before cleaning, servicing, moving or storing the appliance. Grip the plug
Loading ...
Loading ...
Loading ...