1
CERAMIC TOWER HEATER
MODEL: KPT-1502S
Thank you for choosing Trustech Ceramic Tower Heater!
This user manual will provide you with valuable information necessary for the
proper care and maintenance of your new product. Please take a few
moments to thoroughly read it and start enjoying your warm winter!
Always here to help you
For any questions or help, please email us: Support@trustechproducts.com
2
Important Safety Instructions
Electrical safety and cord handling
·Voltage: Before plugging in the heater, make sure your outlet voltage and circuit
frequency correspond to the voltage stated on the appliance rating label.
·Electrical circuit: Always plug this heater into a separate wall outlet socket, which
must withstand 12.5A load. To avoid circuit overload, do not operate another
high-wattage product on the same circuit.
·Connection: To insert the plug, grasp it firmly and guide it into the outlet.
·WARNING! No adaptor, пo extension cord: Do not use the heater with a power
board, double adaptor or extension cord,as these may overheat and create a fire risk.
·Protect the power cord:
-Do not operate the heater with the cord coiled up; always fully unwind.
-Do not twist or kink the cord or let it touch heated surfaces.
-Do not pull the cord.
-Never carry the heater by the cord.
-Arrange the cord away from any traffic areas so no one will trip over it.
-Do not run the cord under carpeting or cover it with rugs, runners, etc.
·WARNING! To reduce the risk of fire, electric shock or injury:
-Never touch the heater with wet or damp hands or feet.
-Do not use the heater if any part of it has become wet. If it happens, please
immediately call a qualified service technician to inspect the heater and replace all
the wet parts.
-Never spill liquid into the heater; never immerse the cord, plug or any part of the
appliance in water or other liquids.Do not reach for an appliance that has fallen into
water. Under such circumstances, switch off and unplug immediately.
Damaged cord: Check the power cord regularly for visible damages in order to avoid
any hazards. If the cord is damaged, it must be replaced by the manufacturer or
qualified personnel.
·WARNING! Damaged heater: Do not pick up or operate the appliance if the power
supply cord, plug or housing is damaged, malfunctions, or has been dropped or
damaged in any manner.
·Plug: It is normal for the plug to feel warm; however, a loose fit between the AC
outlet and plug may cause overheating and distortion of the plug. Contact a qualified
electrician to replace a loose outlet.
·After use: Switch off and unplug the appliance from the power outlet when it is not
in use and before cleaning, servicing, moving or storing the appliance. Grip the plug
3
and remove it from the outlet, do not pull the cord when it is disconnecting.
Usage conditions and restrictions.
·Domestic use only: This appliance is intended for indoor household use only. It is not
suitable for commercial, industrial or trade use.
·Space heating only: Do not use this appliance for anything other than its intended
purpose, and only use it as described in this
manual. Any other use is not recommended and may cause fire,electric shock or
injury.
·Protect from moisture: This appliance is not intended for use in bathrooms, laundry
areas or similar indoor locations.Never locate this appliance near a bath tub, shower
or water.
·No outdoor use: Do not use this appliance outdoors , on wet surfaces or in the
immediate surroundings of a swimming pool.
·No clothes drying: Do not use this appliance as a drying rack for clothing.
·Ventilation: Only use this heater in a well ventilated area. To prevent a possible
fire,do not insert or allow objects to enter any ventilation or exhaust openings. Do
not block air intakes or exhaust openings in any manner .
·WARNING! No external timer: Never operate the heater on a program
switch,external timer switch or any other appliance for automatic operation, as there
is a risk of fire if the heater is covered or positioned incorrectly. In order to avoid a
hazard due to inadvertent resetting of the thermal cut-out, do not connect it to a
circuit that is regularly switched on and off by your electricity provider.
·Accessories: The use of accessory attachments not recommended by the appliance
distributor may result in fire,electric shock or personal injury.
·Usage restriction: This appliance may be used by children aged from 8 years and
above. People with reduced physical, sensory or mental capabilities,or lack of
experience and knowledge must use it under supervision or instruction concerning
use of the appliance in a safe way, and understand the hazards involved.
·Children should not play with the appliance. Cleaning and user maintenance should
not be carried out by children without supervision.
·Children younger than 3 years should be kept away unless continuously supervised.
·Children aged between 3 and 8 years should not plug in, regulate, clean the
appliance or perform user maintenance.Children in this age group should only switch
on/off the appliance, provided that it has been placed in its intended, normal
operating position, and they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
·WARNING! Do not leave the appliance unattended during use! Always switch off and
unplug it when not in use and unattended. Do not use this heater in small rooms
4
when they are occupied by whom is not capable of leaving the room on their own
without constant supervision.
·Do not touch during use: Do not touch the front grille during use, as it will become
very hot. Do not insert any objects through the grille into the interior of the
appliance.
·CAUTION: Hot! Some parts of this heater саn bесоmе vеry hоt whеn іn uѕе. То avoid
burns, do not let bare skin touch hot surfaces. Be particularly careful when children
and vulnerable persons are present. Always let the heater cool down before touching
it, even if it is unplugged from the power supply.
·To ensure personal safety, do NOT use this heater:
-In front of or immediately below an electrical outlet socket.
-Close to a radiant heat source.
-On long pile carpet or a flokati rug.
-Behind a door.
-Near a window where it may get splashed with rain.
-Near flammable materials or surfaces(such as furniture, curtains, pillows,bedding,
papers, clothes). Keep such materials at least 1m away from the front of the heater
and 50cm from the sides and rear of the heater.
-In any areas where petrol, paint or other flammable substances are
stored/used,(such as in a garage or workshop), as the heater has hot and arcing parts
inside which may spark.
-In the immediate vicinity of a bath,shower or swimming pool.
·Service: This heater contains no user-serviceable parts inside. Do not attempt to
open and repair the heater by yourself.Other components should only be serviced by
a qualified technician.
·Do not open: All covers are intended to prevent direct access to the heating
elements and must be in place when the appliance is in use.
·Malfunction: In case of malfunction,disconnect the plug immediately and contact
your local store for advice.
·Storage: To avoid damaging the heater during storage or transport, keep the heater
in a dry place, free from excessive vibration.
·Improper use: Improper use or installation may result in the risk of fire, electric
shock and/or injury. We assume no liability for any eventual damages caused by
improper use or incorrect handling.
5
Product Overview
1.Handle
2.Function control
3.Filter (at the back, not visible here)
4.Safety grille covering the heating elements
5.Base
6.Tip over switch
7.Power switch (at the back, not visible here)
8.Display window
NOTE: Due to continued product improvement, images and illustrations in
this manual may vary slightly from the product purchased. All images in this
manual are for reference purposes only. Parts are not necessarily pictured to
scale.
6
NOTE:
Portableelectricheatersaredesignedfor spotheating,
orasa supplementaryheat source.
Theyarenot intendedto be main sources of
heat
duringthenormalheatingseason.
Getting Started
Before first use
·Unpack: This product has been packaged to protect it against transportation
damage. Unpack the appliance and keep the original packaging and materials
in a ѕаfе рlасе. Іt wіll hеlр рrеvеnt апу dаmаgе if the product needs to be
transported in the future, and you can use it to store the appliance when it is
not in use. In the event that the packaging is to be disposed of, please recycle
all packaging materials where possible.
·Safe packaging disposal: Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging materials are out of their
reach and disposed of safely.
·Cord: Inspect the power cord and plug, and all other parts of the appliance,
for visual damage. Do not use the appliance if anything appears to be
damaged or not working properly. In case of damage,return the product to
your local store.
·Documentation: Make sure you have read and understood all instructions
and warnings in this manual. Refer to the product overview to familiarise
yourself with the product and identify all parts.Pay particular attention to the
safety instructions on the previous pages.
7
When turning on your heater for the first time,
itisnormalfortheheatertoemita'newheater'smell,
whichwill
quickly pass.This isnocause forconcern.
Ensure good ventilation.
Operating Instructions
Using the heater Location
·Place the heater in an upright position on a firm, level, dry and
heat-resistant floor surface, taking into considering all relevant safety
information on the previous pages. Avoid placement on carpets in order to
prevent failure of the safety switch.
·The heater is for floor-standing use only.· Ensure that there is sufficient
distance from the wall, fixtures and other appliances. The distance at the
front must be at least 1m to exclude the risk of fire.
Connection
·plug the heater into an appropriate electrical outlet and switch on power to
the outlet.
·Always use a separate socket that has no other high wattage appliances
connected at the same time - do not plug it into a power board or socket
adaptor; do not use an extension cord.
8
Setting the temperature
When heating starts, you can use the [ + ] and [ - ] button to set the
temperature you want.
Automatic Thermostat
The heater will turn on and off automatically to maintain the room's
temperature at this set level.
(For example, given you set the temperature at 80 °F, the heater will stop
working when the temperature reaches 80 °F and rework when the
temperature is lower than it.)
Selecting a function
The function control has 5 buttons, as listed below:
Oscillation
Press the OCS button, open oscillation function, press again, stop oscillation
function.
CAUTION: Never attempt to adjust the swivelling mechanism manually, as it
could damage the heater.
9
MODE operation
The heater is equipped with a fan, which can be used to run the appliance
without heat output.
·ON/OFF/MODE:ON -Fan-Heat1-Heat2-OFF
Instruction for Remote
1.ON/OFF/MODE:
Firstly, Turn on the Power Switch behind the heater
Press the red button on the remote to switch the mode
1st Press: Turn on with the Cool Fan Mode
2nd Press: H1 Mode
3rd Press: H2 Mode
4th Press: Turn off
2.TEMP: Temperature Setting
3.OSC: Oscillating
4.Timer: 12H
10
Switching off
·When you no longer need the heater, after turning off the heater, the fan
will continue to work and stop working after 30 seconds.
·Unplug the heater from the power source.
Timer：1-12H
Safety features
Overheat protection
This heater is equipped with an automatic reset temperature control
(overheat protection), which switches the heater
off automatically in the event of abnormal overheating. While this feature
provides additional safety in case of overheating, first and foremost you
should eliminate all potential reasons that can lead to overheating and create
a fire risk.
·If the overheat protection has been triggered, unplug the heater from the
wall outlet. Let the heater cool for about 10 minutes. Eliminate the cause of
the overheating (for example,excessive dust in the heater, or the air outlet is
covered) and start it up again.
Tilt protection (tip over switch)
The appliance is fitted with a tip over safety switch, which switches the
heater off automatically if it is tilted or tips over. This prevents hazards
caused by overheating.
Should this happen, place the heater upright again, but take care as it may
still be hot. The heater will turn on again automatically once it is back in an
upright position.
WARNING: Always place the appliance on a smooth, horizontal surface
without carpets in order to prevent failure of the safety switch.
11
Other Useful Information
Cleaning and maintenance
·If the outside of the heater needs cleaning, wipe it with a soft, dry cloth.Use
a slightly damp cloth, if necessary, and then dry it with a dry cloth. Allow
some time for the heater to dry thoroughly before reconnecting it to the
power supply.
·To clean the filter, remove the screw that holds the air intake grille in place
at the back of the appliance. Open the grille and remove the filter. Clean the
filter under running water, then let it air-dry thoroughly before reinstallation.
CAUTION: Do not reinstall the filter until it is completely dry.
Storage
·If you are not going to use the heater for a while, please unplug it at the wall
outlet.
·Store the appliance in its original packaging, to protect it from dust, in a cool
and dry place, out of children's reach.
WARNING!
·Before attempting any maintenance or cleaning the heater, switch off and
disconnect the appliance from the power supply and wait until it has cooled
down.
· Do not use abrasive cleaning powders, furniture polish, solvents, or wire
brushes, as these can damage the surface finish. Do not immerse the cord, plug
or heater in water or other liquids for cleaning. Do not allow water to enter
part of the appliance.
· Do not attempt to repair the heater yourself. Any repairs must be carried
out by a qualified technician.
12
WARRANTY
TRUSTECH warrants this product against defects in materials and/or
workmanship under normal use for a period of ONE (1) YEAR from the date of
purchase by the original purchaser (“Warranty Period”). If a defect arises and a
valid claim is received within the Warranty Period, at its option, TRUSTECH will
either 1) repair the defect at no charge, using new or refurbished replacement
parts, or 2) replace the product with a new product that is at least functionally
equivalent to the original product, or provide a store credit in the amount of the
purchase price of the original product. A replacement product or part, including
a user-installable part installed in accordance with instructions provided by
TRUSTECH, assumes the remaining warranty of the original product. When a
product or part is exchanged, any replacement item becomes your property and
the replaced item becomes TRUSTECH’ s property. When a store credit is given,
the original product must be returned to TRUSTECH and becomes TRUSTECH’ s
property. To obtain warranty service, e-mail TRUSTECH Limited Warranty Service
at Support@trustechproducts.com. Please be prepared to describe the product
that needs service and the nature of the problem.
This warranty does not apply to:
a) damage caused by failure to follow instructions relating to product
’
use or
the installation of components; b) damage caused by accident, abuse, misuse,
fire, floods, earthquake or other external causes; c) damage caused by service
performed by anyone who is not a representative of TRUSTECH; d) accessories
used in conjunction with a covered product; e) a product or part that has been
modified to alter functionality or capability; f) items intended to be periodically
replaced by the purchaser during the normal life of the product including,
without limitation, batteries or light bulbs; g) any product sold
“
as is
”
including,
without limitation, floor demonstration models and refurbished items; or h) a
product that is used commercially or for a commercial purpose.
13
CONTACT US
Thank you for choosing TRUSTECH product.
For any customer product questions or honor your warranty, please
write to Support@trustechproducts.com. Our usual response time is
within 12 hours!
