Loading ...
Loading ...
Loading ...
EN
Perform initial setup
• When the unit is powered on for the rst
time, the [Setup wizard] appears on the
display panel. Follow the instructions
below to congure some basic settings.
To listen to Internet radio, you need to
set up Wi-Fi connection rst Wi-Fi
Protected Setup (WPS) is a standard
created by Wi-Fi Alliance for easy
establishment of secure wireless home
network If your wireless router supports
WPS, you can quickly and securely
connect the radio to the router through
one of the two setup methods: Push
Button Conguration (PBC), or Personal
Identication Number (PIN). For those
that do not support WPS, you have
another option to connect the radio to
the wireless router.
Note
• Before you connect to a network, familiarize yourself
with the network router.
• Make sure that your home Wi-Fi network is enabled.
• For better Wi-Fi reception, rotate and adjust the
position of the Wi-Fi antenna.
When [Setup wizard] is displayed, turn
SELECT knob to select [YES] to start the
setup. If you select [NO], you are asked
to run the wizard next time.
Press SELECT knob to conrm.
[12/24 hour format] is displayed.
Turn SELECT knob to select
12 or 24 hour format.
Press SELECT knob to conrm.
Auto update list is displayed
Repeat steps 3 to 4 to select whether to
synchronize time with radio stations.
• [Update from DAB+]: synchronize time
with DAB+ stations.
• [Update from FM]: synchronize time
with FM stations.
• [Update from Network]: synchronize
time with Internet radio stations.
If [Update from Network] is
selected, repeat steps 3 to 4 to set
time zone, and then repeat steps 3
to 4 to set daylight saving time.
• [No update]: deactivate time
synchronization.
If [No update] is selected, repeat
steps 3 to 4 to set date and time.
Repeat steps 3 to 4 to select [YES] to keep
network connected.
Repeat steps 3 to 4 to select the Wlan
region.
The radio begins to search for wireless
networks automatically.
A list of available Wi-Fi networks
appear.
Repeat steps 3 to 4 to select your Wi-Fi
network
Press SELECT knob to select an option to
connect your wireless router:
• [Push Button]: select this option if
your wireless router supports WPS
and PBC setup method.You are
prompted to press the connect
button on your router and then press
OK to continue.
Loading ...
Loading ...
Loading ...