Loading ...
Loading ...
Loading ...
26 English
Installation
Installation
C
4. Insert the adaptor onto the water tap,
and then tighten the screws while lifting
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
D
6. While pulling down part (D) on the
water hose, connect the water hose to
the adaptor. Then, release part (D). The
hose ts into the adaptor with a clicking
sound.
7. To complete connecting the water hose,
see 2 and 3 on the “Connecting to a
threaded water tap” section.
NOTE
• After connecting the water hose to the adaptor, pull the water hose down to check if it is
connected properly.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
WD80TA046BE_04200B-03_EN(Indicative).indd 26 2021/2/24 14:58:16
Loading ...
Loading ...
Loading ...