Loading ...
Loading ...
Loading ...
Troubleshooting
52
English
Troubleshooting
Information codes
If the dryer fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Information
code
Meaning Action
tC
Air temperature sensor
issue
exchanger. If this continues, call for
service.
tC5
Compressor temperature
sensor issue
Wait 2-3 minutes. Turn the power on
and restart.
dC
Running the dryer with door
open
Close the door and restart.
If this continues, call for service.
HC Compressor overheat Call for service.
5C
Water tank full
Drain pump is out of order
Empty the water tank, turn the
power on, and restart. If this
continues, call for service.
AC6
Check communications
between the main and the
inverter PBAs.
Depending on the state, the
dryer may automatically returns
to normal operation.
Turn the dryer off and turn it on
again. Then, restart the cycle.
If the information code continues
to appear, call for service.
3C
Check the motor for
operation.
Try restarting the cycle.
If the information code continues
to appear, call for service.
FIL+tEr
(Buzzer rings)
Heat exchanger needs to be
cleaned
Clean the heat exchanger.
For any codes not listed above, or if the information code continues to appear, call for
service.
DV5000T_DC68-04209F-00_EN.indd 52 2020/9/8 14:05:50
Loading ...
Loading ...
Loading ...