Loading ...
Loading ...
Loading ...
Version 07/11- Page 8
FIGURE 11
Turn the power supply on. Turn on blower and light. If the rangehood does not operate, check that the circuit breaker is not tripped
or the house fuse blown. If the unit still does not operate, disconnect the power supply and check that the wiring
connections have been made properly.
USE AND CARE INFORMATION
This rangehood system is designed to remove smoke, cooking vapors and odors from
the cooktop area.
For Best Results
Start the rangehood several minutes before cooking to develop proper airow. Allow the
unit to operate for several minutes after cooking is complete to clear all smoke and odors
from the kitchen.
Cleaning
The metal grease lters should be cleaned frequently in hot detergent solution or washed
in the dishwasher. Stainless steel cleaner should be used on stainless rangehoods.
Abrasives and scouring agents can scratch stainless steel nishes and should not be
used to clean nished surfaces. To remove the grease lter see FIGURE 10
Replacing the Lamps
Using gloves to handle the halogen bulbs, remove the snap-on lamp cover (as indicated in
FIGURE 11) by levering it from under the metal ring, supporting it with one hand. Remove
the halogen lamp from the lamp holder by pulling gently. Replace the lamp with a new
one of the same type, making sure that you insert the two pins properly into the housings
on the lamp holder. Replace the snap-on lamp cover.
FIGURE 9
4) Install the CHARCOAL FILTER behind the center grease lter opening by inserting and locking into
place, as indicated in FIGURE 9. Replace the grease lters back into the bottom of the hood and snap
into place.
ALL INSTALLATIONS
FIGURE 10
DUCTLESS INSTALLATION CONTINUED
Loading ...
Loading ...
Loading ...