Loading ...
Loading ...
Loading ...
Instructions for the installer
25
IMPORTANT: when installing the appliance above a cupboard, a dividing
shelf, as shown above, must be installed.
If installed above an under-bench oven, this is not required.
Installation of an oven without cooking fan underneath the hob is
forbidden.
2.3 Electrical connection
Make sure that the voltage and capacity of the power supply cable conform
to the data shown on the plate located under the protective cover. Do not
remove this plate for any reason.
The power supply cable plug and the wall socket must be of the same type
and conform to the current electrical system regulations. Check that the
power line is adequately earthed.
On the power line, install an all-pole disconnect switch with minimum contact
gap of 3 mm located at an easily accessible position near the appliance.
Do not use reducers, adapters or shunts.
Loading ...
Loading ...
Loading ...