Loading ...
Loading ...
Loading ...
Important: Make sure when replacing the drip tray to push it all the way into
the machine to avoid leaking.
11.4 Cleaning the Brew Head and Portafilter
a. Both the brew head and portafilter should be cleaned frequently.
b. Wipe the brew head with a clean damp cloth.
Caution: HOT! Danger of burning or scalding! Ensure the machine has
completely cooled down prior to cleaning.
c. If the inner screen inside the brew head, (Fig. 1, M) accumulates coffee oils,
it can be removed for a thorough cleaning using a screwdriver. Ensure it is
attached back onto the machine the same way after cleaning.
d. Hand wash the portafilter and sieves with warm water. Do not use harsh or
abrasive cleaners, or alcohol/solvent-based cleaners to clean the brew head
or portafilter. When cleaning the portafilter and sieves, hold under running
water. Rinse well and dry carefully. When not using the espresso machine,
do not store the portafilter in the locked position. This will avoid unnecessary
wear to the seal.
Important: Never wash the loose parts or accessories in the dishwasher.
Hand wash only!
e. To clean internal parts of the portafilter by hand, turn the sieve to the notch
of the portafilter to release the sieve (Fig. 4). Then remove the silicone seal
and the dispensing spout for cleaning. Rinse well with gentle dishwashing
liquid and warm water. Dry completely before replacing the silicone seal and
the dispensing spout in the filter holder. The seive must be aligned with the
notch of the portafilter so that it can be properly engaged.
11.5 Descaling the Machine
When making espresso, always use cold clean water. Using spring water or
filtered water will slow down calcium build up. We recommend descaling the
machine after 100-200 uses or at least every 2-3 months. Empty the water tank
and fill the tank with a mixture composed of 30 oz. of water and one packet of
Capresso Cleaning Solution or similar descaling agent.
NOTE: Do not use vinegar as this will considerably shorten the life of the seal
inside the brew head.
Descaling the Brew Head
a. Remove the portafilter.
b. For best results unscrew the screen inside the brew head. Wipe off any
coffee residue with a damp cloth.
c. Fill the water tank with the descaling solution and water.
d. Place a large container beneath the brew head.
e. Press the "Double Cup" button and allow water to flow into the container.
Repeat this process again then allow machine to sit for 15 minutes. Press
the "Double Cup" button again to run more Cleaning Solution through the
machine. Empty the container.
Descaling the Steam Wand
f. Place the empty container unter the steam wand.
g. Press the Hot Water button and turn the steam knob counterclockwise to
the steam icon. Let the remainder of the Cleaning Solution flow through the
steam wand into the container and then turn the steam knob clockwise to
the off position.
12.
Loading ...
Loading ...
Loading ...