Loading ...
Loading ...
Loading ...
Seagate FireCuda Product Manual, Rev. H 12
Drive Specifications
Figure 2 Typical 2D - 5V Startup and Operation Current Profile
2.7.2 Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line.
• Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 20 MHz.
2.7.3 Supply Voltage
Note
Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current.
Allowable voltage 5V ± 5%
Allowable noise/ripple 100 p-p max, 0-20 MHz
Allowable supply rise time <100 ms
Loading ...
Loading ...
Loading ...