Loading ...
Loading ...
Loading ...
15
Cleaningmetalgreaselters
The lters must be cleaned every 2 months of operation,
or more frequently for particularly heavy usage, and
can be washed in a dishwasher.The metal grease lters
should be cleaned frequently in hot detergent solution or
washed in the dishwasher. Stainless steel cleaner should
be used on stainless rangehoods. Abrasives and scouring
agents can scratch stainless steel nishes and should not
be used to clean nished surface. Remove all water or
any other liquid from washing before re-installing lters.
• Remove the lters one at a time, supporting them
with one hand and turning the safety knobs (pull
and turn).
• Wash the lters, taking care not to bend them.
Allow them to dry before retting.
• Replace them and x them using the safety knobs
provided (pull and turn).
Replacing Activated Charcoal Filter
The lter is not washable and cannot be regenerated, and must
be replaced approximately every 4 months of operation, or more
frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them towards
the back of the unit and at the same time pulling downward.
• Remove the saturated charcoal lter by releasing the xing
hooks.
• Fit the new lter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces forwards.
Lighting unit
• Remove the snap-on lamp cover
by levering it from under the metal
ring, supporting it with one hand.
• Replace the lamp with a new one
of the same type, making sure that
you insert the two pins properly into
the housings on the lamp holder.
• Replace the snap-on lamp cover.
Gu10self-ballastedled
lamps – listed in ac-
cordance with
ul1993/nmx-
j-578/1-ance/
csac22.2No.
1993
Loading ...
Loading ...
Loading ...