Loading ...
Loading ...
Loading ...
11
nitial set-up of your oven I
Selecting manual operation mode
After your appliance is connected to your mains supply for the first
time, the numbers on the timer display will flash. Before you can sele
a cooking function or set a temp
ct
erature, you must set the appliance
ation mode, press the manual button (12)
first
e LED display and
cooking symbol will go out and the
lus
al point symbol will stop flashing and the oven is ready to
and set the thermostat to its maximum temperature
ectly normal for a smell to be produced during this
at any windows in the room are left
ain in the room whilst the
into “manual operation” mode.
o To select manual oper
on the control panel.
Setting the time of day
After your appliance is connected to your mains supply for the
time, you must set the time of day before you can use the oven.
o When the oven is connected to your mains supply for the first
time (or after a power cut), the digits on th
the automatic cooking symbol (7) will flash.
o Press and hold down the programme button (12) for a couple of
seconds. The automatic
digits will remain steady.
o Whilst the decimal point symbol (9) is flashing, use the p
(11) and minus (13) buttons to set the correct time of day.
o When the correct time of day is shown on the LED display,
release the plus and minus buttons and wait a few seconds. The
decim
use.
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select the fan oven
function
setting.
o It is perf
process.
o You should make sure th
open during this process.
o It is advisable for you not to rem
burning off process is taking place.
Loading ...
Loading ...
Loading ...