Loading ...
Loading ...
Loading ...
22
EN
Using the Silent Function
This function prevents potential claims by
neighbors, reducing noise from outdoor units.
1
Turn the appliance on.
2
Press Silent button.
•
is displayed on the display screen.
NOTE
• This function is disabled when you press
Mode or Energy Saving or Jet Mode button.
• This function is available with Cooling,
Heating, Auto Changeover, Auto Operation
Mode.
• Capacity may decrease when outdoor unit
Silent Function is selected.
• At a certain temperature, Silent Function
would not work to protect the system.
Using the Auto Clean
Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor unit.
This function removes such moisture.
1
Turn the appliance on.
2
Press Auto Clean button.
•
is displayed on the display screen.
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• If you turn off the unit, the fan continues to run
for 30 minutes and cleans the inside of the
indoor unit.
Feedback Lighting
• When adjusting On/Off, temperature, mode,
and fan speed, this appliance offers a
feedback lighting. If you change the brightness
of indoor lighting, the brightness of feedback
lighting also changes. Even with the indoor
lighting off, feedback lighting does not turn off.
• This function may not be supported,
depending on the model.
Adjusting Brightness of the
Indoor Lighting
• Press Dim button repeatedly, and change the
brightness of the indoor lighting to 20 %, 40
%, 100 % or 0 %.
• If you set the Dim Function, the display screen
goes back to the previous display screen after
a while.
• If you press Art or Mood button in the
brightness 0 %, the brightness becomes 100
%. Then, if you press Dim button, the
brightness becomes 0 %.
• Even when the air conditioner is turned off,
the user lighting scene can be selected, and
the brightness can be adjusted.
• When the appliance is turned off the light will
remain at the set brightness level, however
this can be adjusted by pressing the DIM
button repeatedly to 0 % (off).
No. Dim
1 20 %
2 40 %
3 100 %
- 0 % (off)
Loading ...
Loading ...
Loading ...