Loading ...
Loading ...
Loading ...
Warning and Safety instructions
9
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele authorised service technician.
Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
The cooktop is not intended for use with an external timer switch
or a remote control system.
The connection to the gas supply must be carried out by a
suitably qualified and competent gas fitter in accordance with
current local and national safety regulations (see “Installation – Gas
connection”). In Australia and New Zealand, gas installations must
be in accordance with AS/NZS 5601. If the plug has been removed
or the connection cable is not supplied with a plug, the cooktop
must be connected to the mains electricity supply by a suitably
qualified electrician (see “Installation – Electrical connection”).
If the mains connection cable is damaged, it must be replaced
with a special connection cable type H 05 VV-F (PVC insulated),
available from Miele, by a Miele authorised service technician or
suitably qualified and competent electrician in order to avoid a
hazard (see “Electrical connection”).
During installation, maintenance and repair work, the appliance
must be completely disconnected from the mains electricity supply.
The gas supply must also be turned off. It is only completely isolated
from the gas and electricity supply when:
- the mains circuit breaker is switched off, or
- it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
- the gas inlet valve is closed.
Loading ...
Loading ...
Loading ...