Loading ...
Loading ...
Loading ...
Operation
27
Switching on during a power outage
If there is an interruption to the
electricity supply, the gas can be
ignited manually, e.g. with a match.
Press down the relevant control knob
and turn it anti-clockwise to the large
flame symbol.
Hold the control knob pressed down
and light the gas at the burner with a
match.
Keep the control knob pressed down
for a further 5-10seconds and then
release it.
Adjusting the flame
The burners can be regulated at any
level between the strongest and
weakest flame.
As the outer part of the flame is much
hotter than the centre, the tips of the
flames should stay beneath the pan
base. Flame tips which extend beyond
the sides of the pan merely warm up
the air in the room and can also
damage pan handles and increase the
danger of injury.
Adjust the flame so that it does not
spread out beyond the sides of the
pan.
Wok burner
Depending on the type of control knob,
there may be a stopper between the
low and high settings at the 6 o'clock
position.
Press the control knob down lightly to
move past this resistance.
Loading ...
Loading ...
Loading ...