Loading ...
Loading ...
Loading ...
6. Place the Pump into the Fountain Base and
attach to the Hose. Be sure to run the power cord
through the rear cord slot.
7. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing. Make
sure the water completely submerges the pump
and the water runs clear during operation.
NOTE: We recommend that you use distilled water
to prevent scale build-up. The first time you operate the
pump it can take up to 5 minutes for the air to be
completely expelled and water begins to flow properly
6
8. Plug the pump into your local power supply. Make
sure that there is no water around the plug & always
keep the power source in a dry place.
9. You can now adjust the water pump to your flow
preference. (see Quick Tip) Congratulations, your
fountain is now complete. Don’t forget to add water
regularly as water will evaporate over time.
Relax and enjoy your new fountain.
Loading ...
Loading ...
Loading ...