Loading ...
Loading ...
Loading ...
5
5.Before Use
5.1 Inserting the SIM cards
This tablet has dual SIM technology allowing the use of two mobile networks
simultaneously. It has two slots - one is a dedicated SIM card slot and the other is a
SIM card/microSD card slot.
To insert the SIM card(s), first turn off the tablet. Use a needle or similar object to
press the hole on the side of the SIM card tray. The tray will pop out, gently take it
out and place the SIM card(s) onto the slot as shown in the illustrations next to the
slots. Then push the SIM card tray back into position.
5.2 Inserting the microSD memory card
To insert the microSD card, first turn off the tablet. Use a needle or similar object to
press the hole on the side of the SIM card tray. The tray will pop out, gently take it
out and place the microSD card onto the slot as shown in the illustrations next to the
slots. Then push the SIM card tray back into position.
Supports up to 128GB microSD card with FAT32 format.
！ Use only memory cards recommended by the manufacturer. Pay attention to the
selection of the proper format - micro SD card, capacity and type / class. Incompatible
memory cards may damage the device and cause the stored data to be destroyed as
well. Incompatibility of the memory card can be caused, among others, by incorrect
card format (required format micro SD) or unsupported card capacity - above the
value recommended by the manufacturer.
5.3 Charging the Battery
Charge the battery before first use. The battery should be charged using the adapter
included with the device or another adapter intended for this type of equipment (if in
doubt contact the seller or authorised service agent). Use only adapters and cables
recommended by the manufacturer. Using incompatible adapters or cables can cause
explosion of the battery or damage to your device. When the battery is near a
complete discharge, you will be notified of low battery charge. To continue use of the
device, charge the battery.
Loading ...
Loading ...
Loading ...