Loading ...
Loading ...
Loading ...
7
Water filter
IMPORTANT!
●
The water connection to your Ice & water refrigerator must be installed
by an qualified plumber or Fisher & Paykel trained and supported service
technician and comply with all state and local laws.
●
Installation and use MUST comply with all state and local plumbing codes.
Check with your local public works department for plumbing codes.
You must follow their guidelines as you install the water filtration system.
●
To avoid serious illness or death, only connect your water filter to safe
drinking water.
●
The water filter cartridge needs to be changed when the replacement
indicator icon illuminates. This will happen every 6 months.
●
If the water filtration system has been allowed to freeze, replace filter cartridge.
Failure to replace the disposable filter at recommended intervals may lead to
reduced filter performance and failure of the filter, causing property damage
from water leakage or flooding.
●
In cases of excessively reduced filter life — we recommend that you consult
a local plumber or your water supplier for advice on suitable filtration
requirements for the water supplied to your home.
●
Filter replacement is the consumer’s responsibility and will not be covered
by the warranty except in the case of faulty parts or materials within the
filter cartridge.
●
If the water has not created ice for some time or ice has an unpleasant taste
or odour dispose of ice and refer to ‘Automatic ice’ for flushing instructions.
If unpleasant taste or odour persists, you may wish to fit a new filter cartridge.
●
Use new tubing supplied with the refrigerator. DO NOT reuse old tubing from
old water and ice connections.
●
Your water filtration system can withstand up to 120psi (827kPa) of water
pressure. Ensure the supplied pressure reducing valve is installed before
installing the water filtration system. DO NOT install if water pressure exceeds
120psi (827kPa).
To reduce the risk associated with property damage due to water leakage
or flooding:
●
DO NOT install systems in areas where ambient temperatures may go
above 100°F (38°C) or drop below 33°F (0.6°C).
●
DO NOT install on hot water supply lines. The maximum operating water
temperature of this filter system is 100°F (38°C).
●
DO NOT install where water hammer conditions may occur. If water hammer
conditions exist, you must install a water hammer arrester.
SAFETY AND WARNINGS
Loading ...
Loading ...
Loading ...