Loading ...
Loading ...
Loading ...
18
INSTALLATION INSTRUCTIONS
IMPORTANT!
●
All connections must be checked for leaks.
●
Ensure 1/4” (6mm) tubing is routed away from
sharp objects, sharp corners (beware of kinking
the tube as this will stop water flow), clear of the
refrigerator rear compartment and not in a location
where it can be kinked or squashed.
●
Ensure all push-fit connections are firmly pushed into place.
The tube should push in 5/8” (16mm) before reaching
the stop.
●
If tubing is removed at any point, re-cut the end and re-insert.
Tubing must be fully inserted to avoid leaks.
●
To remove tube from connection points first turn off the isolating faucet.
Gently push the dispensing pad a few times using a glass or container
to remove the static line pressure. Push in the collet firmly while pulling back
on the tubing at the same time, as shown in Diagram11.
847200 - Certified by: IAPMO R&T against NSF/ANSI Standards 43, 53, 401 and
CSA B4831.1 for the reduction of claims specified on the performance data sheet
and at iapmort.org. 847200 compounds certified under NSF/ANSI 401 have been
deemed as incidental contaminants/emerging compounds. Incidental contaminants
are those compounds that have been detected in drinking water supplies at trace
levels. While occurring at only trace levels, these compounds can affect the public
acceptance of drinking quality water.”
847201 - Certified by: IAPMO R&T against NSF/ANSI Standards 43 and CSA B4831.1 for
the reduction of claims specified on the performance data sheet and at iapmort.org.
Rated capacity:
847200 – 102 gallons (386 litres)
847201 – 170 gallons (643.5 litres)
Diagram 11
Loading ...
Loading ...
Loading ...