Loading ...
Loading ...
Loading ...
Releasethehandlebypressingdownon
thehandlereleasepedalwithyourfootand
pullingbackanddownonthehandlewith
yourhand.
Note: The agitator will not rotate if the vacu-
um cleaner is in the upright position.
Handle
Release
Pedal
HANDLE MOUNTED
SOME MODELS
To start the vacuum cleaner, slide the
On/Off switch from the OFF position to the
ON position. To stop the vacuum cleaner,
slide the On/Off switch to the OFF position.
Note: This switch operates the suction
motor only. For the agitator to rotate, the
agitator On/Off selector must be in the ON
position and the handle must be released
from the upright position.
To select a pile heightsetting:
Turn off cleaner. Select a pile height setting
by tilting the cleaner back until front wheels
are lifted slightly off the floor.
Slide the adjustment lever to the correct set-
ting.
There are four (4) pile height settings on the
vacuum. Use the LOW setting for most car-
pets and bare floor cleaning (with agitator
OFF), and the HIGH setting for very long
pile carpets like shag carpet, scatter rugs,
etc. Use the other settings as needed for
carpet heights in-between.
Height
Adjustment
Lever
\
CAUTION
Do not allow vacuum cleanerto remain
inone spot for any length oftime when
the agitatoris turning.Damage to car-
pet may occur.
Loading ...
Loading ...
Loading ...