Loading ...
Loading ...
Loading ...
TO REMOVE DUST BAG
WARNING
Pull out on the
bag cover release
located near the
top of the bag
cover.
Bag Cover
Release-_T _
Bag I/
Cover-_i_
Bag
Pull the bag
cover forward
and lift up.
Remove and lay
aside.
Grasp the dust bag
collar and pull gently,
carefully removing
the dust bag.
Throw away the used
dust bag.
Do not reuse.
J " " Bust
Bag
- Bag Holder Check the bag
holder and the
motor safety fil-
ter. If either is
blocked, check
Safety TROUBLE-
Filter SHOOTING.
NEVER REUSE A DUST BAG. Very
fine materials, suchas carpet freshen-
er, face powder,fine dust, plaster,
soot, etc. can clogthe bag and cause
itto burstbefore it is full. Change bag
moreoften when vacuumingthese
materials.
TO REPLACE DUST BAG
Unfold the new
dust bag. Fold
the safety seal
tab on the new
dust bag away
from the open-
ing that fits on
the bag holder.
Dust
Bag
NOTE: See PARTS AND FEATURES for
bag number.
Insert the dust bag
onto the bag holder
completely by hold-
ing the bag collar.
Place the dust bag
collar into position.
Tuck the bag
behind each of the Bag
four bag retention Retention
Corner
corner flaps shown Flaps
here. Be sure the
bottom and sides
of the dust bag are
completely within
bag cavity prior to
replacing the bag
cover.
Slots
Position the bag
cover so its posi-
tioning tabs fit
into the body
positioning tab
slots.
Close the bag
cover.
You will hear a I1=
distinct snap Bag
when cover is Cover--_
securely closed.
Check to see that the dust bag isfully
enclosed in the bag cover.
15
Loading ...
Loading ...
Loading ...