Napoleon W1750364 User Manual

Loading ...

W415-1344 / A / 12.14.16

TheauxiliaryfunctioncontrolstheAUXpoweroutleton

theControlModulewhichcontrolstheNIGHTLIGHT™.

A. UsetheModeKeytoguideyoutotheAUXicon.

B. PressingtheUpArrowKeywillactivatethe

NIGHT LIGHT™.

C. PressingtheDownArrowKeywillturnthe

NIGHTLIGHT™off.Asingle“beep”willconﬁrm

thereceptionofthecommand.

35.12

°F

OFF

°F

6.10 NIGHT LIGHT

6.11 LOW BATTERY / MANUAL BYPASS

The life span of the remote batteries depends on various factors: quality of the

batteries, the number of ignitions, etc.

When the transmitter batteries are low, a battery icon will appear on the LCD

display before all battery power is lost. When the batteries are replaced, this icon

will disappear.

When the receiver batteries are low, no “beep” will be emitted from the receiver

when it receives an ON/OFF command. This is an alert for the receiver that there’s

low battery. When the batteries are replaced, the “beep” will be emitted from the

receiver when the ON/OFF key is pressed.

If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding the

three position slider switch on the receiver to the “ON” position. This will bypass the remote control feature

and the appliance main burner will come on if the gas valve is in the “ON” position.

35.13A

°F

6.12 IN THE EVENT OF A POWER FAILURE

Ifthereceiverisequippedwithbatteriestheywillenableﬂameheightcontrol,ON/OFForthermostat

functiontocontroltheﬁreplaceduringapowerfailure.Referto“APPLIANCEOPERATION”sectionwhen

communicationsbetweenreceiverandtransmitterhavebeenlost.Thewillreceiveremita“beep”soundto

conﬁrmprogramminghasbeensuccessfuloncepowerisrestored.Duringapowerfailure,iftheﬁreplacewas

on,theﬂameheightwillstayatthesettingpriortothefailure.Ifoffwhenthefailureoccursandthenturnedon,

theﬂameheightwillcomeonat“HI”.Theﬂameheightcanthenbecontrolledbytheremote.

35.14

6.13 CONTROL MODULE

Thecontrolmoduleoffersaremotelyactuated120VAUX

outletfortheaccentlightsandaconstantlypowered

120V outlet.

NOTE: Control module ON/OFF switch should

always be in the “ON” position. If for any reason the

module is turned “OFF”, the components plugged

into the module won’t have power.

35.16

CONSTANTLY POWERED

120V OUTLET

120V AUX OUTLET

MAINS VOLTAGE

SUPPLY CORD

MODULE ON/OFF

SWITCH (SHOWN IN

THE ON POSITION)

COMMUNICATION

BUS (3 PIN)

Loading ...

Napoleon W1750364 Natural Gas

User Manual - Page 21