Loading ...
Loading ...
INSERTING AND
REMOVING DISCS
INSERTING DISCS
There are three disc slots on the right side of
the Blade and Disc Holder. Each slot holds one
food processor disc securely, with disc cutting
blade totally protected behind a plastic barrier.
To insert a disc, hold it so the cutting side faces
left and the disc stem connector side faces
right. Grasp the disc by placing your thumb on
the edge of the disc and your fingers under the
center lock on the stem attachment plate.
This positions the disc for correct insertion into
the holder. WARNING: CUTTING EDGES OF
FOOD PROCESSOR DISCS ARE VERY
SHARP. ALWAYS KEEP FINGERS AWAY
FROM SHARP SIDE.
Never try to force a disc into the holder.
If inserted correctly, the disc will slide easily
into the slot. Slide the disc straight into a slot.
The disc will slip securely into place, with its
cutting blade behind the plastic barrier. Discs
will sit correctly and safely only when inserted
in this manner.
Note: Discs with fixed stems will not fit into
the Blade and Disc Holder.
REMOVING DISCS
To remove a disc, grasp the disc by placing
your thumb on the edge of the disc and your
fingers under the center lock on the stem
attachment plate. Pull the disc straight out.
CAUTION: NEVER GRASP A DISC BY THE
BLADE EDGE.
CONNECTING TO
DISC HOLDER
For expanded storage capacity, the Cuisinart
®
Blade and Disc Holder can be used with the
Cuisinart
®
Disc Holder (model DH-4). The two
holders were designed with similar lines and
curves to create an attractive storage center
when placed side by side. You can create any
combination of Blade and Disc Holders and
Disc Holders to suit your food processor
accessory storage needs.
CLEANING AND CARE
The Blade and Disc Holder is made of a high-
impact plastic that has a smooth, easy-to-clean
surface. Occasionally wipe your Blade and Disc
Holder with a cloth or sponge that has been
dipped in warm soapy water. To remove stub-
born spots, use a mild soap solution, then wipe
with a damp sponge. Do not put the Blade
and Disc Holder in the dishwasher. Blades,
disc stem and discs should always be clean
when they are put into the Blade and Disc
Holder. The Blade and Disc Holder is not meant
for temporary storage of soiled blades between
periods of use.
LOCK
OPEN
®
03CU13011 BDH-2 IB 6/17/03 3:59 PM Page 3
Loading ...