Loading ...
The Cuisinart
®
Blade and Disc Holder provides
convenient, accessible and safe storage of all
Cuisinart
®
Food Processor (except DLC-X,
DLC-XP, DLC-5 and LPP models) accessories.
The unit holds: one stainless steel blade, one
plastic or metal dough blade, one detachable
disc stem, and three food processor discs.
The transparent cover locks to the base with
a tamper and child-resistant lock that will not
open if the Blade and Disc Holder should tip
over.
All blades and discs, like sharp knives,
should be stored out of the reach
of children.
The compact Blade and Disc Holder can
be used alone or in combination with the
Cuisinart
®
Disc Holder (model # DH-4).
OPERATING
THE LOCK
To open the child-resistant
lock, pull the knob out
toward you and turn
clockwise 90º. This
sequence will unlock the
lock. Gently lift up the
transparent cover. Do not
force the cover open when the knob is in the
“locked” position. The knob will automatically
return to the locked position when the cover
is closed.
CAUTION: Do not twist the lock back to
the "locked" position when the transparent
cover is open, as doing so may break the
lock.
INSERTING
ACCESSORIES
The Blade and Disc Holder stores a metal
blade in the left triangular cavity and a plastic
or metal dough blade in the lower center
triangular cavity. Hold each piece carefully by
the center hub, and insert with its upper blade
facing down. WARNING: DO NOT TOUCH
METAL BLADE, AS DOING SO MAY RESULT
IN INJURY.
The detachable disc stem fits in the round
opening in the upper center section of the
Blade and Disc Holder. Insert the disc stem
face down, with the rounded left side of the
semi-circular connector towards the back.
Icons embossed on the inside surface of the
Blade and Disc Holder show proper placement
of the blades and detachable disc stem.
03CU13011 BDH-2 IB 6/17/03 3:59 PM Page 2
Loading ...
Loading ...