Loading ...
Loading ...
Loading ...
8
EN
• To change the current heating mode, press the heating mode
button (18) once while the current heating mode is being displayed.
Wait approx. 3seconds for the setting to be updated. The display
(11) shows the thermostat setting again.
• The following heating modes are available:
Display Power
On, when ambient
temperature is
Temperature
setting
H2
(High)
1500 W
≤ Set temperature
60 – 85°F
(15.6 – 29.4°C)
Always on ON
H1
(Low)
750 W
≤ Set temperature
60 – 85°F
(15.6 – 29.4°C)
Always on ON
EC
(Eco)
1500 W ≤65°F (18.3°C)
72°F (22.2°C)
750 W
65 – 72°F
(18.3 – 22.2°C)
In the EC (Eco) mode, the product cycles between the
low and high settings to reach optimum efficiency. In
this mode, the Eco mode indicator (13) lights up.
OF
(off)
– Always on –
In this mode, the heater is switched off. Only the fan is
working for 45 seconds to cool down the product.
NOTICE
You can also press and hold the increase (14) or
decrease (15) button to quickly set the temperature.
Setting the timer (automatic switch off)
• While the product is operating, press the timer button (19). 00
starts flashing.
• Press the increase (14) or decrease (15) button to set the
timer. Alternatively, press the timer button (19) to increase the time.
The maximum time is 9 hours, in 1 hour increments (1H, 2H...9H).
• Wait 3 seconds. The set time stops flashing. The remaining time is
shown on the display.
• The product switches off automatically after the set time has elapsed.
NOTICE
To deactivate the timer, set the timer to 00.
Loading ...
Loading ...
Loading ...