Loading ...
Loading ...
Loading ...
Servicing Your Honda 75
Clutch System
1. Drain the engine oil (page 63).
2. Remove the six clutch cover bolts (1) and
clutch cover (2).
3. Remove the six clutch spring bolts and springs
(3).
Loosen the bolts in a crisscross pattern in two or
three progressive steps.
4. Remove the clutch pressure plate (4).
5. Check the operation of the bearing (5) with
your finger. The bearing should turn smoothly
and quietly.
If the operation is not smooth, refer to an official
Honda Service Manual (page 184) for bearing
disassembly or see your dealer.
6. Remove the clutch lifter (6) first, then remove
the clutch lifter rod (7).
7. Remove the seven clutch discs, six clutch
plates, judder spring and spring seat (8).
Clutch Disc/Plate Removal
(1) clutch cover bolts (2) clutch cover
(3) clutch spring bolts and springs
(4) clutch pressure plate
(2)
(1)
(4)
(3)
(5) bearing
(6) clutch lifter (7) clutch lifter rod
(5)
(7)
(6)
(8) clutch discs, clutch plates, judder spring and spring
seat
(8)
Loading ...
Loading ...
Loading ...