User Manual Leviton DZPA1-2BW Indoor Decora Smart Z-Wave Plus Plug-in Outlet

Documents for Leviton DZPA1-2BW

The following documents are available:
User Manual Specification
  • Specification Sheet - (English) Download
  • Specification Sheet - (French) Download
Installation Instruction
  • PRODUCT CLEANING INSTRUCTIONS - (English) Download
  • Installation Manual - (French) Download
Other Documents Photos
DZPA1-2BW photo
WARNINGS AND CAUTIONS
To be installed and/or used in accordance with electrical codes and regulations.
If you are unsure about any part of these instructions, consult an electrician.
To reduce the risk of overheating and possible damage to other equipment do
not install to control a motor-operated receptacle, fluorescent lighting fixture, or a
transformer supplied receptacle.
For control of electronic ballast, CFL’s and LED drivers.
Unplug unit when servicing loads.
Leviton recommends Z-Wave
®
technology in residential installations up to 7,500 sq ft.
Metal junction boxes may adversely affect network coverage. Communication is
designed to pass through interior materials, exterior materials are designed to reflect
RF energy and may prevent communication to detached buildings.
Z-Wave
®
networking technology is designed for distributed communication. Large
clustering of communicating devices in a centralized location (ie. a closet) is not
recommended.
Save this instruction sheet. It contains important technical data along with testing and
troubleshooting information which will be useful after installation is complete.
Z-Wave Plus™ Certification
• Increased communication range
• Network Wide Inclusion
• Support for beaming and secure commands
• Over The Air (OTA) updates
Compatible with Leviton Vizia RF
+
systems
Manual local control
Ease of installation - No new wiring
FEATURES
Leviton’s Decora Smart
TM
Z-Wave
®
Devices are designed to communicate with each
other via Radio Frequency (RF) to provide remote control of your lighting. In a Z-Wave
®
network, each device is designed to act as a router. These routers will re-transmit the
RF signal from one device to another until the intended device is reached. This ensures
that the signal is received by its intended device by routing the signal around obstacles
and radio dead spots. This plug-in outlet is compatible with any Z-Wave
®
enabled
network, regardless of the manufacturer and can also be used with other devices
displaying the Z-Wave
®
logo.
WARNING: TO AVOID FIRE, PERSONAL INJURY OR DEATH DO NOT USE the
remote for the control of high power heating appliances such as portable heaters.
There can be some unexpected consequences if not used with care. For example,
an empty coffee pot can be remotely turned on. If that should happen, your coffee pot
could be damaged from overheating. If an electric heater is turned on by remote control
while clothing is draped over it, a fire could result. This device will not control lighting
that is used with electronic low-voltage and high frequency power supply transformers,
nor high pressure discharge lamps (HID lighting). This includes mercury-vapor, sodium
vapor and metal halide lamps.
Decora Smart
TM
Devices are ideal for living rooms, bedrooms, kitchens, dining rooms,
home offices, outdoor lighting or anywhere full control of lighting is desired.
INTRODUCTION
Attaching Load to Plug-In
Outlet Module:
Step 1
Attach load plug into module receptacle noting proper
polarity of blades. Ensure the load to be controlled is
fully operational and in the ON position.
Attaching Plug-In Outlet Module to
Wall Receptacle:
Step 2
INSTALLATION
NOTE: Use check boxes when Steps are completed.
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that
this product at the time of its sale by Leviton is free of defects in materials and workmanship under
normal and proper use for five years from the purchase date. Leviton’s only obligation is to correct
such defects by repair or replacement, at its option. For details visit www.leviton.com or call
1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of
this product or reinstallation. This warranty is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened, abused, or altered in any manner, or is
not used under normal operating conditions or not in accordance with any labels or instructions.
There are no other or implied warranties of any kind, including merchantability and fitness
for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the
duration of any such implied warranty, including merchantability and fitness for a particular purpose,
is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost
sales or profits or delay or failure to perform this warranty obligation. The remedies provided
herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise
.
DI-000-DZPA1-02B
DI-000-DZPA1-02B
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in
writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality Assurance
Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at
1-800-405-5320.
© 2016 Leviton Mfg. Co., Inc.
© 2016 Leviton Mfg. Co., Inc.
COPYRIGHT AND TRADEMARK INFORMATION
Decora is a registered trademark of of Leviton Manufacturing Co., Inc. Z-Wave and Z-Wave Plus are
registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries.
Use herein of third party trademarks, service marks, trade names, brand names and/or product
names are for informational purposes only, are/may be the trademarks of their respective owners;
such use is not meant to imply affiliation, sponsorship, or endorsement. No part of this document
may be reproduced, transmitted or transcribed without the express written permission of Leviton
Manufacturing Co., Inc.
PATENTS
This product is covered by U.S. Patent No. 8,664,886 and corresponding foreign patents.
TECHNICAL SUPPORT
For additional information contact Leviton’s Technical Support at:
1-800-824-3005 or visit Leviton’s website at www.leviton.com
INSTALLATION INSTRUCTIONS
Plug-In Oulet with
Z-Wave
®
Technology
Cat. No. DZPA1
Rated: 120 VAC, 60 Hz
1800W Incandescent
5A LED/CFL
1800VA Fluorescent
15A Resistive
1/2 HP Motor
Schedule
your plug-in
lamps, holiday
lighting or small
appliances to
turn on/off from
anywhere using
a compatible
Z-Wave
®
controller
decora smart™
RATINGS
Incandescent - 1800W - 120VAC, 60Hz
LED/CFL - 5A - 120VAC, 60Hz
Fluorescent - 1800VA - 120VAC, 60Hz
Resistive - 15A - 120VAC, 60Hz
Motor - 1/2 HP - 120VAC, 60Hz
Plug the Outlet Module into wall receptacle.
Verify that receptacle is live.
If controlled by a wall switch, the switch must
be kept on at all times.
WEB VERSION
Loading ...