BAB-2438 User Manual

Loading ...

Page 5

STEP 3

Place in window: Rest bracket on the bottom sill.

Adjust each Sill Stop Wing outward until the steel tabs are securely positioned

against the front OUTER WINDOW FRAME.

THIS IS MANDATORY FOR PROPER SUPPORT OF A/C.

TO ENSURE PROPER DRAINAGE, THE TOPSHELF A/C BRACKET SHOULD BE

INSTALLED WITH A SLIGHT TILT ABOUT 1/4” to 1/2” DOWNWARD TOWARD

THE OUTSIDE. MAKE SURE THE FOOT PADS ARE RESTING ON A FLAT, STABLE

SURFACE. ENSURE THAT THE SIDING MATERIAL IS CAPABLE OF WITHSTANDING,

WITHOUT DAMAGE, THE LOAD CREATED BY THE FOOT PADS PRESSING

AGAINST THE SURFACE.

This is done by pressing both spring buttons and sliding leg to rmly secure against

exterior surface.

Ensure spring buttons are fully seated in hole.

NOTE: Requires clearance of 10” below window.

SET UP & USE

Place A/C Unit on Support Bracket: Install

your A/C in accordance wit h t h e

manufacturer's instructions and local and

state ordinances. Be sure to provide a means

to prevent the single or double hung sash

from being opened above air conditioner.

Lock each pin into the closest slot on

the frame rail.

TILT TO

BACK

FOOT PADS

FLAT AGAINST

SURFACE.