Loading ...
Loading ...
Loading ...
7
English
At a Glance
Remote Control Overview
01
02
03
04
10
08
12
13
15
07
09
11
14
16
05
06
01
Set temperature/Timer indicator
NOTE
• For the AR-KH00U model, the temperature is shown
in degrees Fahrenheit (°F) on the display.
02
Operation mode indicator
03
Air flow direction indicator
04
Options indicator
05
Low battery indicator
06
Signal transmission indicator
07
Fan speed indicator
08
Power button
09
Mode button
NOTE
• For air conditioners that do not provide the heating
function, Heat may appear on the remote control
display when you press the
button, but heating is
not available.
10
Wheel
NOTE
• You can control the set temperature, fan speed, and
air ow direction by rotating the Wheel.
11
SET button
12
Temperature button
13
Air flow direction button
14
Fan speed button
15
Timer button
16
Options button
NOTE
• To select a function, point the remote control
to the remote control sensor on an indoor
unit. Then select the function by using the
Wheel or by pressing the
button within
5 seconds.
• If you do not press another button within
7 seconds after pressing the
or
button, these button functions are
deselected.
• If you turn off and then turn on the remote
control, the settings of the Timed on/off,
Purify, and Sleep functions that you set
previously are cancelled.
• If the indoor unit number (Zone 1 to Zone 4)
that you select on the remote control display
does not match the indoor unit (default:
Indoor Unit 1) pointed by the remote control,
the indoor unit will not operate.
• If you press a button on the remote control
near a strong light such as a compact
uorescent lamp or neon sign, the air
conditioner may not operate. In this case,
move close to the indoor unit, and then
operate the remote control.
• If other appliances respond to the remote
control, contact a service center.
360_Remote_ENG.indb 7 2015-12-24 오후 3:34:01
Loading ...
Loading ...
Loading ...