Loading ...
Loading ...
Loading ...
54
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Self Clean function (some models only)
During a Self Clean
cycle, the oven is louder
than usual.
This is normal: the oven’s cooling fans operate at their
highest speed.
The display shows
0:00 but the oven door will
not open.
The oven door is locked
because the oven is still
too hot to be used for
cooking.
Wait until the Self Clean cycle
has finished. If you cancelled
a Self Clean cycle which was
already underway, the oven
still needs to cool down before
it can be used. The oven door
will automatically unlock.
At a point during a Self
Clean cycle, the function
dial halo goes out and the
temperature indicator starts
displaying cascading bars
.
This is normal: the oven
is in the last phase of
the Self Clean cycle,
cooling down.
Wait until the Self Clean cycle
has finished. A long tone will
sound and the oven door will
automatically unlock when the
oven is ready to use.
I have cancelled a Self
Clean cycle but cannot use
the oven:
●
the oven door will not
open
●
the display is still
counting down minutes
or showing 0:00
●
the Self Clean
function indicator is
still lit the temperature
indicator shows
cascading bars
●
the dials and controls
are unresponsive.
This is normal: if the
function dial halo
is unlit, you have
successfully cancelled
the Self Clean cycle.
However, the oven is
still too hot to be
used for cooking and
needs to cool down.
Wait until the cool-down phase
has finished. A long tone will
sound and the oven door will
automatically unlock when the
oven is ready to use.
Note: depending on when the
Self Clean cycle was cancelled,
the cool-down phase may take
up to 45 minutes.
The oven is beeping and
the display shows
a2 or a3.
See section ‘Alert codes’ for instructions.
There is a power cut during
a Self Clean cycle.
Power cut. The door will remain locked.
Once the power is turned back
on, the door will remain locked
until the oven has cooled to a
safe temperature.
Loading ...
Loading ...
Loading ...