Loading ...
Loading ...
Loading ...
Operation
15
Setting
the Child Lock
Setting the door
alarm
Resetting the
filter indicator
Activating
Quick Freezing
Press the button for the desired function to view and select other settings.
Press and hold the CHILD LOCK button for three seconds to lock
the dispenser and all of the other control panel functions.
Press and hold again for 3 seconds to unlock. The Child lock does
not stop water or ice from dispensing when activated.
The ALARM button also controls the door alarm that sounds three
times in 30-second intervals when a compartment door is left open
for more than 60 seconds. The alarm stops sounding when the
door is closed. Press the ALARM button once to activate and
deactivate the door alarm function.
Press and hold the FILTER RESET button for approximately
3 seconds to reset the filter indicator after the water filter has been
replaced.
Press the QUICK FREEZING button once to activate the QUICK
FREEZING function. The QUICK FREEZING icon on the display
panel will illuminate when activated. The QUICK FREEZING
function runs the freezer compartment at the coldest setting for
a 24-hour period to increase icemaking by up to about 20%, and
then turns off automatically.
Setting The Functions
•
Contact your local service center if the alarm continues to sound after the doors are
closed.
NOTE
• It is recommended that you replace the water filter approximately every 6 months,
when the water filter indicator light reaches 0 or if the ice or water starts to taste
bad.
NOTE
•
Press the button again to cancel the QUICK FREEZING function.
NOTE
Activating
Energy Saving
Press the ENERGY SAVING button for at least 3 seconds to
activate or deactivate the function.
This function is recommended for added energy savings.
(Some heaters to reduce excess moisture on the refrigerator may
be turned off) The energy saving function is also recommended
during long periods of time spent away from home-like vacation.
Loading ...
Loading ...
Loading ...