Loading ...
Loading ...
Loading ...
9
BEFORE FIRST USE
BEFORE FIRST USE
of your Breville
the Big One™
Check that cooking plates are clean and free
of dust. If necessary, wipe over with a damp
cloth. Place the toastie maker on a flat, level
surface with the lid in the closed position.
1. Insert power plug into a 230/240V
power outlet and turn the power on. The
red power ‘ON’ light will illuminate.
2. Allow the toastie maker to preheat until
the green ‘READY’ light illuminates.
3. During this time, prepare the toastie
by buttering four slices of bread and
preparing filling.
4. Place two slices of bread on the plates,
buttered sides down. Place filling on top
of bread.
5. Place remaining bread on filling, buttered
side up.
NOTE
The green ‘READY’ light will cycle
on and off during the toasting
process indicating that the correct
temperature is being maintained.
6. Carefully close the lid and clip handles
together. Do not force the lid to close.
7. Toasting should take approximately
three minutes. Exact toasting time will be
a matter of taste. It will also depend on
the type of bread and type of filling used.
8. When the toastie is cooked, remove it
with the help of a plastic or wooden
spatula. Never use metal tongs or a knife
as these can cause damage to the
non-stick coating.
9. To maintain heat, keep the lid closed until
you are ready to toast the next toastie.
NOTE
At all times the lid must be closed.
When using the toastie maker for the
first time you may notice a fine smoke
haze. This is caused by the heating of
some of the components. There is no
need for concern.
WARNING
Steam will be ejected from between the
cooking plates when the lid is closed.
Be careful not to make contact with the
steam as it may cause burns.
IMPORTANT
Fully unwind power cord from cord
storage facility before use.
Loading ...
Loading ...
Loading ...