Loading ...
Loading ...
Loading ...
SMART DIAGNOSIS (Only for applied models)
Smart diagnosis function is...
Be aware!
Differences of regional call qualities may have influence on the function.
If you use a home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be successful if the call is made from a mobile phone with
poor cell reception
How to use the function
1. Open all the doors of the refrigerator.
2. Press the refrigerator door open detection
switch 5 times as in the figure to make the
light inside the compartment blink.
3. Place the phone near the speaker hole in the top
right hand side door hinge
4. Do not take away the telephone while data is
being transmitted.
5. After the completion of the data transmission,
the consultant will explain the result of the smart
diagnosis and advise accordingly.
w CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops.
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
Ensure the microphone of the telephone is
toward the speaker hole.
During the data transmission for smart diagnosis,
hold the telephone 10cm away from the speaker
hole and avoid any background noises.
When the data transmission is completed, the
refrigerator will be automatically turned off and on
a few seconds later.
FOR INTERNAL CONTROLLER MODEL
26
Loading ...
Loading ...