Loading ...
Loading ...
Loading ...
9
FILTER REPLACEMENT REMINDER INDICATOR
When the filters are due for replacement, the SPEED indicator will start to flash.
Once the filters have been replaced following the steps in the “INSTALLING AND REPLACING THE
FILTERS” section, hold down the TIMER button for five seconds, until the unit bleeps to register the
new filters.
CLEAN OR REPLACE THE FILTERS
1. If necessary wipe the inside of the filter cavity with a dry cloth.
2. After cleaning or replacing the filters refit them into the unit in the correct order following
the “INSTALLING AND REPLACING THE FILTERS” section.
3. Do not connect the power before the unit is fully assembled. The filters must be installed
before operating the unit.
Replacement filters are available from the retailer as a pair under the reference: FIL-EAP400D-V2
Loading ...
Loading ...