Loading ...
Loading ...
Loading ...
10
TECHNICAL DATA
Model
EAP400D-V2
Fan Speed
Low
Medium
High
Airflow (m
3
/hr)
70
100
150
Noise level (db)
25
32
40
Power rating
36 Watts / 220-240 V, 50 hz
Ioniser
5x10
6
ions/cm
3
Power cord length
≥ 1.4 meters
Net Size (WxDxH)
329x170x300 mm
Net Weight
3.2 kgs
VOC and HEPA Filter
Size (WxDxH)
Efficiency
Particle Size
Life Time
20.9×10.2×4cm
99.9%
≤0.0003 mm
about 6 months
Carbon Activated and Photo catalyst Filter
Size (WxDxH)
Material
Active Filter Absorption
Surface
Life Time
20.3×9.7×1.5cm
Walnut Shell
300,000 m
2
about 6 months
TROUBLESHOOTING
The Air purifier does
not seem to work
Is the plug disconnected from the wall socket?
Is the socket switched on?
The filter cover panel may not be properly installed, remove and reinstall.
No clean air is
delivered or
performance is poor
Please ensure filters are cleaned and the packing was removed before installing the
filter cartridge
Ensure unit is only operating with a filter cartridge installed.
Set the unit to high fan speed.
Ensure the air purifier is suitable for the room size and for larger rooms it has been left
long enough to operate.
Abnormal noise
during operation
Check if the filter cartridge packaging was removed during the filter change.
Unit may not be on a hard / flat surface.
Air inlet or outlets may be blocked. Remove obstruction and try again.
Speed light Flashing
Indicates that the filters require replacing, replace filters, and hold the TIMER button
for 5 seconds to resume normal operation.
Control panel not
responding
Check that child lock has not been activated, by holding power button for around 5
seconds, or unplug the unit for 5 minutes.
Loading ...