Loading ...
Loading ...
2
IMPORTANT SAFETY INSTRUCTIONS
W A R N I N G
Read all safety warnings designated by the symbol and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or injury.
READ ALL INSTRUCTIONS.
The term “power tool” in all of the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1. Work area safety
A. Keep work area clean and well lit. Cluttered or dark areas invite accidents
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
C. Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
A. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
reduce risk of electric shock.
B. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
C. Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
D. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
E. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of electric shock.
F
NOTE: The term “residual current devide (RCD) may be replaced by the term ”ground fault circuit
interrupter (GFCI) or (earth leakage circuit breaker (ELCB)”.
. If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
A. Stay alert, watch what you are doing and use common sense when operating a power
medication. A moment of inattention while operating power tools may result in serious personal
injury.
B. Use personal protective equipment. Always wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce
personal injuries.
C. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking u
p or carrying the tool. Carrying power tools with
D. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to the power tool may result in personal injury.
E. Do not overreach. Keep proper footing and balance at all times. This enables better control
of the power tool in unexpected situations.
Loading ...
Loading ...
Loading ...