Loading ...
Loading ...
Loading ...
OPERATING YOUR CHAIN SAW
16
OPERATING THE CHAIN BRAKE (See Figure 9 )
W A R N I N G
If the chain brake does not stop the chain immediately, or if the chain brake will not stay in the run
position without assistance, take the saw to an authorized service center for repair prior to use.
Check the operating condition of the chain brake prior to each use.
• Engage the chain brake by rotating your left wrist towards the guard, allowing the back of your
hand to engage the brake while the chain is rotating. You should hear beeps signaling the
Bchain brake is active. e sure to maintain both hands on the saw handles at all times.
Fig. 9
BRAKE OFF BRAKE ON
Loading ...
Loading ...
Loading ...