Loading ...
Loading ...
Loading ...
Troubleshooting en
57
Fault Cause troubleshooting
The programme does not
start.
4. Press Start/Reload to start the
programme.
The door cannot beopened. is activated.
▶
Continue the programme by select-
ing Spin or Drain and pressing
Start/Reload .
→"Resuming the programme when
the programme status is Rinse
Hold", Page40
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
→"Cancelling the programme",
Page40
Water level is too high.
▶
Start the Drainprogramme.
Programme with active oxy-
gen has been stopped; the
active oxygen is removed.
▶
Wait until there is no active oxygen
in the drum.
Power failure.
▶
Open the door using the emergency
release.
→"Emergency release", Page62
The water is not draining. Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain
hose is caught or jammed.
▶
Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.
Drain pump is blocked.
▶
→"Cleaning the drain pump",
Page50
is activated.
▶
Continue the programme by select-
ing Spin or Drain and pressing
Start/Reload .
→"Resuming the programme when
the programme status is Rinse
Hold", Page40
The water outlet hose is con-
nected too high.
▶
Install the water outlet hose at a
maximum height of 1 metre.
→"Technical specifications",
Page66
Pump cover is not correctly
assembled.
▶
Correctly assemble the pump
cover.
Pump cover is not correctly
assembled.
▶
Correctly assemble the pump
cover.
Loading ...
Loading ...
Loading ...