Candy LS DSI710NUK Dishwashers

User Manual - Page 13

For LS DSI710NUK.

PDF File Manual, 17 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Attention
This dishwasher is equipped with an anti-overflow safety device
which works even when power is switched off, and if the water
level is too high the supply will automatically be closed off.
Important
To ensure the correct operation of the anti-overflow safety
device, it is recommended not to move or to tilt the dishwasher
during operation.
If it is necessary to move or to tilt the dishwasher, first make
sure the washing cycle is finished and that no water is left in
the tank.
To set the programme, turn the dial clockwise until the pointer
() indicates the symbol of the required programme on the
control panel. Then press the On/Off button. Ensure that the
water supply is turned on and the door is closed properly.
“65°C” button
This button is an option available on the “UNIVERSAL
INTENSIVE 65°C” and “DAILY INTENSIVE 65°C” programmes
which will increase the temperature of the water of washing
from 50°C to 65°C.
32’ button
The “32’ button” combined with the delicate programme
washes lightly soiled dishes in 32 minutes.
IMPORTANT:
When this button is selected, the programme finishes
at the position on the programme dial. If this option
is not selected a normal delicate programme will be run
and will finish at the
S
position.
Selecting the programme and special functions
Use in conjunction with programme guide
24
Economy button
The “E” button reduces the final heating of the water during
the last rinse. This activates a natural drying process, as with
a normal draining board, simply by leaving the door ajar at the
end of the cycle to enable the natural circulation of air. The “E”
button permits an energy saving of more than 20% and
shortens the cycle.
Recommended for evening washes when the dishes are not
required perfectly dry, immediately, straight after washing.
IMPORTANT:
When this button is selected, the programme finishes at
the position on the programme dial.
The cycle ends
When the program handle reaches the S symbol, the cycle ends.
Push the On/Off button to cut power to the dishwasher and
then only open the door.
25
Loading ...
Loading ...
Loading ...