V-Zug DSTS9G 90cm Downdraft System

Operating instructions - Page 11

For DSTS9G.

PDF File Manual, 24 pages, Read Online | Download pdf file

DSTS9G photo
Loading ...
Loading ...
Loading ...
4 Care and maintenance
3.8 Saturation indicators
Saturation indicator for metal grease filters and long-life activated charcoal
filters
The and buttons flashes after 100 operating hours.
The saturation level has been reached and the metal grease filters and long-life ac-
tivated charcoal filters must be cleaned.
Activating/deactivating the saturation indicator (recirculation models)
Hold the button depressed for five seconds.
The recirculation mode is activated.
Hold the button depressed for five seconds to deactivate the recirculation mode.
The recirculation mode is deactivated.
Saturation indicator for activated charcoal filters in recirculation box
The and buttons flash after 550 operating hours.
The saturation level has been reached and the activated charcoal filters must be
replaced.
Resetting the saturation indicator
ü The metal grease filters have been cleaned.
ü The activated charcoal filters have been replaced.
ü The long-life activated charcoal filters have been cleaned or replaced.
With the appliance switched off, hold the button depressed until all the LEDs flash
three times.
4 Care and maintenance
4.1 Cleaning the housing
Take care that no water gets into the housing of the appliance! If water gets into
the housing, it can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool, etc. for cleaning, as the
surface could otherwise be damaged.
Remove the screw fuse or switch off the circuit breaker.
Cleaning the outside/inside
With the appliance switched off, hold the button depressed for five seconds.
Wipe protection is activated, all the buttons flash in sequence from left to right.
Clean the outside with a slightly damp cloth and neutral cleaning agent, then wipe dry.
Grease and condensate water can build up on the inside around the metal grease filters.
Clean the inside with a slightly damp cloth and neutral cleaning agent, then wipe dry.
After cleaning, hold the button depressed for five seconds.
Wipe protection is deactivated.
11
Loading ...
Loading ...
Loading ...