Loading ...
Loading ...
Loading ...
5
CHARGING
INSTRUCTIONS
To charge your Cuisinart
®
Salt, Pepper
and Spice Mill for use:
1. Follow assembly instructions for the
Cuisinart
®
Salt, Pepper and Spice Mill
and charging base on page 4 to properly
assemble for charging.
2. Grasp assembled unit
securely and make
sure it is facing
upright. The Salt,
Pepper and Spice
Mill is facing upright
when the Cuisinart
®
logo on the front of
the unit is in proper
reading orientation
(easy to read and
horizontal.)
See fig.10.
3. Place the fully
assembled Salt,
Pepper and Spice
Mill in the charging
base so that the
recessed area on the
back of the unit
housing fits
comfortably with the
protrusion on the
charging base.
See fig.11.
4. Plug charging base
into a 120v power
outlet. Your unit is
now charging for
use. NOTE: Unit is
properly charging if
red LED illuminates
from charging base.
See fig.12.
OPERATION
INSTRUCTIONS
1. Place housing and all removable parts
on a clean, flat surface. Make sure that
all parts have been cleaned and dried
thoroughly and properly assembled
before use.
2. Attach grinding container(s) to the unit
housing with sea salt, peppercorns, or
desired dried spice. NOTE: It is best to
attach the grinding container from the
bottom while holding the unit upright.
3. Line up the arrow on the grinding
container with the arrow on the unit
housing. NOTE: Both arrows should face
each other. This will indicate the grinding
container and unit are properly aligned.
4. Gently push the grinding container
and unit housing together. The grinding
container will fit together comfortably
with the unit housing.
5. Twist the grinding container clockwise
so that the arrow on the unit housing
is now aligned with the lock symbol on
the grinding container. NOTE: The two
pieces will click together indicating
proper assembly.
6. To attach the second grinding container,
flip the unit housing over and repeat
operating instructions.
7. Press the On/Off button in the center
of the unit housing to begin grinding.
NOTE: Only the bottom container will
yield any grinding results. Even though
the grinding container facing upward will
rotate, no grinding will actually take place.
For use with measuring cap:
To use the measuring cap on either grinding
container, grasp the measuring cap and
connect to grinding container by aligning the
grooves on the measuring cap with the ridges
in the grinding container. Press together until
the ridge of the measuring cap rests flat
against the grinding container. NOTE:
The measuring cap can be used on either
container during operation only. When not
in use, the measuring cap should remain in
the uppermost grinding container as the unit
housing will not fit into the charging base if
the measuring cap is on the lower container.
ADJUSTING THE GRIND
To adjust the grind from
fine to coarse, use the
adjustment dial on the
underside of the mill.
Clockwise for a finer grind
and counterclockwise for
a coarser grind.
fig.10
fig.11
fig.
12
Loading ...
Loading ...
Loading ...