Loading ...
Loading ...
Loading ...
4
ASSEMBLY
To assemble your Cuisinart
®
Salt,
Pepper and Spice Mill for use:
1. Place housing and all removable parts
on a clean, flat surface. Make sure that
all parts have been cleaned and dried
thoroughly before assembling.
2. Attach grinding
container(s) to the
unit housing. NOTE:
It is best to attach the
grinding container
from the bottom
while holding the unit
upright.
See fig.1.
3. Line up the arrow
on the grinding con-
tainer with the arrow
on the unit housing.
NOTE: Both arrows
should face each
other. This will indi-
cate the grinding
container and unit
are properly aligned.
See fig.2.
4. Gently push the
grinding container
and unit housing
together. The grinding
container will fit
together comfortably
with the unit housing.
See fig.3.
5. Secure the grinding
container in place by
twisting the grinding
container clockwise
so that the arrow on
the unit housing is
now aligned with the
lock symbol on the
grinding container.
NOTE: The two piec-
es will click together
indicating proper
assembly.
See fig.4.
6. To attach the second
grinding container,
flip the unit housing
over and repeat
assembly instruc-
tions.
See fig.5.
7. Your Cuisinart
®
Salt,
Pepper and Spice
Mill is now assembled.
See fig.6.
For use with
measuring cap:
1. To use the measuring
cap on either grinding
container, grasp the
measuring cap and
connect to grinding
container by aligning
the grooves on the
measuring cap with
the ridges in the
grinding container.
See fig.7.
2. Press together until the ridge of the
measuring cap rests flat against the
grinding container. NOTE: When not in
use, the measuring cap should remain
in the uppermost grinding container,
as the unit housing will not fit into the
charging base if the measuring cap is
on the lower container.
To assemble charging base for use:
1. Place housing, charging base and all
removable parts on a clean, flat surface.
Make sure that all parts have been
cleaned and dried thoroughly before
assembling.
2. Place the removable
spice catcher into the
charging base so
that it fits securely.
NOTE: The spice
catcher will only fit
into the charging
base one way.
See
fig.8.
3. Connect power
adapter to the charg-
ing base by grasping
the pin on the power
adapter and inserting
it vertically into the
back of the charging
base until secure.
NOTE: Do not insert
power adapter into the charging base
while power adapter is plugged into a
power source.
See fig.9.
fig.1
fig.6
fig.8
fig.7
fig.
9
fig.2
fig.3
fig.4
fig.5
Loading ...
Loading ...
Loading ...