Loading ...
Loading ...
Loading ...
35
English
SC2 Owner’s Manual
Setting range: A3 = 414.8 Hz – 466.8 Hz (approx. 0.2 Hz steps)
Default setting: A3 = 440.0 Hz
NOTE
The pitch of an Audio Song is not affected by this setting. The pitch of a MIDI Song is changed, but the setting cannot be
recorded.
Transpose
Shifts the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key
signatures, and to let you easily match the pitch of the keyboard to the range of a singer or other instruments.
For example, if you set this parameter to “5,” playing key C produces pitch F. In this way, you can play the F
major song as if it were in C major.
Setting range: -6 – 0 – +6 (in semitone steps)
Default setting: 0
NOTE
• The sound input from the external device and the recorded Songs cannot be transposed.
• Your keyboard performance data will be transmitted with the transposed note numbers while MIDI note numbers received
from an external MIDI device or computer will not be affected by the Transpose setting.
Half Pedal Point
You can sets the degree to which pressing the damper pedal applies the half-pedal effect. The larger the value,
the wider the half-pedal range. Larger values give you greater leeway in controlling the half-pedal effect.
Setting range: -2 – 0 – +4
Default setting: 0
Half-pedal function
This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you press the
pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a
bit murky and loud with too much sustain, you can release the pedal half way to subdue the sustain (murkiness).
Lowest key (A-1)
F#2: -6 F#3: +6
C3: 0
A#5: -2
C6: 0
E6: +4
Highest
key (C7)
Loading ...
Loading ...
Loading ...